真空吸具批发服务至上「吉玛泰克」父亲节的日期

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould, before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT, while the steel bushing

AGG…-C is fitted on the mould.

once the robot has approached the mould, the gripper is

pressurized, thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

配置和指标

•S1：实现选择输出信号的类型，PNP（P/2）或NPN（N）。

•S2：分别根据NPN或PNP选择（通过S1）实现选择内部PULLUP（PU）或PULL-DOWN（PD）电阻器。

•L1：通电时为绿色。

•L2：当常闭系列输出切换时为琥珀色（例如：全部触点打开）。

•L3：当切换常开系列时琥珀色（例如：全部触点闭合）。

•S1: enables the selection of the type of output signal, PNP(P/2) or NPN (N).

•S2: enables the selection of internal PULL-UP (PU) or PULLDOWN(PD) resistors depending on the NPN or PNP selection(via S1), respectively.

•L1: green when powered.

•L2: amber when the NC series output is switched (e.g. allcontacts open).

•L3: amber when the NO series is switched (e.g. all contactsclosed).

带有 3 个颚式钳的自动定心气动抓持器（SXT 系列）

•双动作 (可按需关闭)。

•高夹紧力。

•防护等级为IP67。

•列柱向上采用双层O型圈设计。

•适用于恶劣的环境。

•可选的磁传感器。

•FDA-H1 食品级润滑脂。

•Double acting (normally closed on request).

•Strong gripping force.

•Protection class: IP67.

•Double O-Ring sealing on the columns.

•Suitable for harsh environments.

•Optional magnetic sensors.

•FDA-H1 food-grade grease.

介质压缩空气符合 ISO 8573-1:2010 [7:4:4]

GIMATIC是一家为工业自动化提供气动、电动夹具（尤其是整套EOAT解决方案）的制造商，产品销量多年来在欧洲乃至全i球范围内都很领i先，在夹具制造业拥有世界i领i先水平的技术